Spectral absorption coefficients of phytoplankton along US GEOTRACES North Atlantic Transect from the R/V Knorr KN199-04 cruise in the subtropical N. Atlantic in 2010 (U.S. GEOTRACES NAT project)

Website: https://www.bco-dmo.org/dataset/3867
Data Type: Cruise Results
Version: 1
Version Date: 2013-01-23

Project
» U.S. GEOTRACES North Atlantic Transect (GA03) (U.S. GEOTRACES NAT)

Program
» U.S. GEOTRACES (U.S. GEOTRACES)
ContributorsAffiliationRole
Neeley, AimeeNational Aeronautics and Space Administration (NASA)Principal Investigator
Chaves, JoaquinNational Aeronautics and Space Administration (NASA-JPL)Co-Principal Investigator
Kinkade, DanieWoods Hole Oceanographic Institution (WHOI BCO-DMO)BCO-DMO Data Manager

Abstract
Spectral absorption coefficients of phytoplankton along US GEOTRACES North Atlantic Transect from the R/V Knorr KN199-04 cruise in the subtropical N. Atlantic in 2010.


Coverage

Spatial Extent: N:38.3307 E:-9.6604 S:17.3581 W:-24.4961
Temporal Extent: 2010-10-16 - 2010-11-02

Dataset Description

Phytoplankton spectral absorption coefficient (ap) from surface samples collected on Whatman, 2.5cm  glass fiber filters (GFF). Samples were collected during Geotraces 2010 (kn199-04).

The following metadata was extracted from the header information from each file. Where necessary the information was incorporated into BCO-DMO metadata fields or retained in file (* and X represent file-specific values):

/begin_header                                                           
/affiliations=NASA_SSAI                                                           
/investigators=Aimee_Neeley Joaquin_Chaves                                                       
/contact=aimee.neeley@nasa.gov                                                           
/experiment=Geotraces                                                           
/cruise=kn199-4                                                           
/station=10                                                           
/data_file_name=F06_St*_AP.csv                                                           
/documents=F06_log.csv                                                           
/calibration_files=SeaBASS_NDFilter.pdf                                                           
/data_type=scan                                                           
/data_status=final                                                           
/start_date=201010XX                                                           
/end_date=201010XX                                                           
/start_time=XX:XX:00[GMT]                                                           
/end_time=XX:XX:00[GMT]                                                           
/north_latitude=XX.XXX[DEG]                                                           
/south_latitude=XX.XXX[DEG]                                                           
/west_longitude=XX.XXX[DEG]                                                           
/east_longitude=XX.XXX[DEG]                                                           
/measurement_depth=0.0                                                           
/water_depth=NA                                                           
!                                                           
!COMMENTS                                                           
!Samples were collected in duplicate using a peristaltic pump at the surface. Samples were collected in conjunction with AOP package deployments                                                            
!Duplicate samples are being reported here (rep numbers are in the field name)                                                           
!Samples were filtered under vacuum (~5-7psi) onto combusted GF/F filters                                                           
!See SeaBass_NDFilter.pdf for explanation of fields                                                           
!See F06_log.csv for metadata                                                           
!                                                           
/missing=-999                                                           
/delimiter=comma                                                           


Methods & Sampling

The following information was obtained from file headers and via correspondence with PIs:
Samples were collected in duplicate, using a peristaltic pump at the surface and were filtered under vacuum (~5-7psi) onto combusted GF/F filters.  Samples from station 1 were collected with WHOI's GEOTRACES pump. Sample numbers for stations > 1 were collected with NASA's surface peristaltic pump. Samples were collected in conjunction with AOP package deployments.


Data Processing Description

For sample processing information and methodology, see associated Supplemental File, "SeaBASS documentation" (SeaBASS_NDFilter.pdf).

BCO-DMO Processing notes:
Edits made:
- Parameter header names were edited to conform to BCO-dMO convention
- Blank data fields were edited to 'nd'
- Edited time to remove colons and drop unused seconds
- Edited precision of lat/lon to four decimals.
- Edited precision of absorbance, and respecctive absorbance standard deviation and absorption coefficient data to 8 decimals.
- Added columns for 'diameter' and 'volume_filtered' (previously in metadata log file)
- Removed the comment information from file headers. Where necessary the information was incorporated into BCO-DMO metadata fields and retained entirely in Dataset Description.

Note: The variable "abs_blank_sd" corresponds to standard deviation data for station 7 only, when sample processing spanned two days (abs_blank_sd was calculated at the end of each day). This parameter is displayed as 'nd' for all other stations where all processing was completed in one day.

Definitions of parameter name components obtained from PI:

  • ap=total particulate absorption
  • ad= detrital absorption
  • aph= phytoplankton absorption
  • ap-ad=aph

Correspondence with the Co-PI on 2013.01.12, necessitated editing the header note indicating NASA's pump. Therefore, this comment retained in the header has been edited to the following text:

# samples from station 1 were collected with WHOI's GEOTRACES pump
# sample numbers for stations greater than 1 were collected with NASA's
# surface peristaltic pump

Additional GEOTRACES Processing: After the data were submitted to the International Data Management Office, BODC, the office noticed that important identifying information was missing in many datasets. With the agreement of BODC and the US GEOTRACES lead PIs, BCO-DMO added standard US GEOTRACES information, such as the US GEOTRACES event number, to each submitted dataset lacking this information. To accomplish this, BCO-DMO compiled a 'master' dataset composed of the following parameters: station_GEOTRC, cast_GEOTRC (bottle and pump data only), event_GEOTRC, sample_GEOTRC, sample_bottle_GEOTRC (bottle data only), bottle_GEOTRC (bottle data only), depth_GEOTRC_CTD (bottle data only), depth_GEOTRC_CTD_rounded (bottle data only), BTL_ISO_DateTime_UTC (bottle data only), and GeoFish_id (GeoFish data only). This added information will facilitate subsequent analysis and inter comparison of the datasets.

Bottle parameters in the master file were taken from the GT-C_Bottle_GT10, GT-C_Bottle_GT11, ODF_Bottle_GT10, and ODF_Bottle_GT11 datasets. Non-bottle parameters, including those from GeoFish tows, Aerosol sampling, and McLane Pumps, were taken from the Event_Log_GT10 and Event_Log_GT11 datasets. McLane pump cast numbers missing in event logs were taken from the Particulate Th-234 dataset submitted by Ken Buesseler.

A standardized BCO-DMO method (called “join”) was then used to merge the missing parameters to each US GEOTRACES dataset, most often by matching on sample_GEOTRC or on some unique combination of other parameters.

If the master parameters were included in the original data file and the values did not differ from the master file, the original data columns were retained and the name of the parameters were changed from the PI-submitted names to the standardized master names. If there were differences between the PI-supplied parameter values and those in the master file, both columns were retained. If the original data submission included all of the master parameters, no additional columns were added, but parameter names were modified to match the naming conventions of the master file.

See the dataset parameters documentation for a description of which parameters were supplied by the PI and which were added via the join method.


[ table of contents | back to top ]

Data Files

File
Spctrl_Absp_GT10.csv
(Comma Separated Values (.csv), 1.10 MB)
MD5:66fedec48757977be956d2884696304d
Primary data file for dataset ID 3867

[ table of contents | back to top ]

Supplemental Files

File
SeaBASS Documentation
filename: SeaBASS_NDFilter.pdf
(Portable Document Format (.pdf), 78.24 KB)
MD5:2017d4134e577dbd0f5e0084994b196a
SeaBASS Documentation for dataset "GT10 - Spctrl_Absp"

[ table of contents | back to top ]

Parameters

ParameterDescriptionUnits
wavelength

Wavelength (between 300-800nm) at which spectrophotometric scans were performed, with a 1nm data interval and 2nm Slit Band Width (SBW).

nm
abs_ap_1

Raw particulate absorbance measurement (no null correction).

dimensionless
abs_ap_1_sd

Standard deviation of 3 filter rotations of particulate absorbance measurements.

dimensionless
abs_ad_1

Raw detrital absorbance measurement of first replicate (no null correction).

degrees Celsius
abs_ad_1_sd

Standard deviation of 3 filter rotations of detrital absorbance measuremenst.

dimensionless
diameter_1

Diameter of sample biomass on filter.

mm
volume_filtered_1

Volume filtered; samples were filtered under vacuum (~5-7psi) onto combusted GF/F filters.

ml
ap_1

Total particulate absorption coeffient (null correction included).

1/m
ad_1

Detrital absorption coefficienct (null correction included).

1/m
aph_1

Phytoplankton absorption coefficient (Aph = Ap - Ad).

1/m
abs_blank_sd

Standard deviation of absorbance of all blank filters measured throughout the analysis period. Note: files that contain both replicates and more than one column of blank error indicates that replicates were analyzed on different days.

dimensionless
abs_ap_2

Raw particulate absorbance measurement (no null correction).

dimensionless
abs_ap_2_sd

Standard deviation of 3 filter rotations of particulate absorbance measurements.

dimensionless
abs_ad_2

Raw detrital absorbance measurement of first replicate (no null correction).

dimensionless
abs_ad_2_sd

Standard deviation of 3 filter rotations of detrital absorbance measuremenst.

dimensionless
diameter_2

Diameter of sample biomass on filter.

mm
volume_filtered_2

Volume filtered; samples were filtered under vacuum (~5-7psi) onto combusted GF/F filters.

ml
ap_2

Total particulate absorption coeffient (null correction included).

1/
ad_2

Detrital absorption coeffient (null correction included).

1/m
aph_2

Phytoplankton absorption coefficient (Aph = Ap - Ad).

1/m
abs_blank2_sd

Standard deviation of absorbance of all blank filters measured throughout the analysis period.  Note:  files that contain both replicates and more than one column of blank error indicates that replicates were analyzed on different days.

dimensionless
station

Unique station identifier.

dimensionless
lat

Latitude component of geographic position where samples were collected.

decimal degrees
lon

Longitude component of geographic position where samples were collected.

decimal degrees
time_gmt

Time of sampling, reported in GMT.

hhmm
date_gmt

Date, recorded in GMT time.

yyyymmdd
depth

Sample depth in meters.

meters


[ table of contents | back to top ]

Instruments

Dataset-specific Instrument Name
Perkin Elmer Lambda 35 Spectrophotometer
Generic Instrument Name
Perkin Elmer Lambda 35 Spectrophotometer
Generic Instrument Description
The Lambda 35 is a double beam UV/Vis spectrophotometer from Perkin Elmer, packing pre-aligned Tungsten and Deuterium Lamps. It has a wavelength range of 190-1100nm and a variable bandwidth range of 0.5 to 4nm.

Dataset-specific Instrument Name
Pump surface
Generic Instrument Name
Pump surface
Generic Instrument Description
A source of uncontaminated near-surface seawater pumped onto the deck of the research vessel that can be sampled and analyzed. This pumped seawater supply is from an over-the-side pumping system, and is therefore different from the vessel underway seawater system.


[ table of contents | back to top ]

Deployments

KN199-04

Website
Platform
R/V Knorr
Report
Start Date
2010-10-15
End Date
2010-11-04
Description
This cruise constitutes the first survey section as part of the U.S. participation in an international program named GEOTRACES. Funding: NSF OCE award 0926423 Science Objectives: To obtain state of the art trace metal and isotope measurements on a suite of samples taken on a mid-latitude zonal transect of the North Atlantic. In particular, sampling targeted the oxygen minimum zone extending off the west African coast near Mauritania, the TAG hydrothermal field, and the western boundary current system along Line W. For additional information, please refer to the GEOTRACES program Web site (https://www.geotraces.org/) for overall program objectives and a summary of properties measured. Science Activities include seawater sampling via GoFLO and Niskin carousels, in situ pumping (and filtration), CTDO2 and transmissometer sensors, underway pumped sampling of surface waters, and collection of aerosols and rain. Hydrography, CTD and nutrient measurements were supported by the Ocean Data Facility (J. Swift) at Scripps Institution of Oceanography and funded through NSF Facilities. They provided an additional CTD rosette system along with nephelometer and LADCP. A trace metal clean Go-Flo Rosette and winch were provided by the group at Old Dominion University (G. Cutter) along with a towed underway pumping system. Additional cruise information is available from the Rolling Deck to Repository (R2R): https://www.rvdata.us/search/cruise/KN199-04 Other Relevant Links: List of cruise participants: [ PDF ] Cruise track: JPEG image (from Woods Hole Oceanographic Institution, vessel operator) ADCP data are available from the Currents ADCP group at the University of Hawaii: KN199-04 ADCP


[ table of contents | back to top ]

Project Information

U.S. GEOTRACES North Atlantic Transect (GA03) (U.S. GEOTRACES NAT)


Coverage: Subtropical western and eastern North Atlantic Ocean (GA03)


Much of this text appeared in an article published in OCB News, October 2008, by the OCB Project Office.

The first U.S. GEOTRACES Atlantic Section will be specifically centered around a sampling cruise to be carried out in the North Atlantic in 2010. Ed Boyle (MIT) and Bill Jenkins (WHOI) organized a three-day planning workshop that was held September 22-24, 2008 at the Woods Hole Oceanographic Institution. The main goal of the workshop, sponsored by the National Science Foundation and the U.S. GEOTRACES Scientific Steering Committee, was to design the implementation plan for the first U.S. GEOTRACES Atlantic Section. The primary cruise design motivation was to improve knowledge of the sources, sinks and internal cycling of Trace Elements and their Isotopes (TEIs) by studying their distributions along a section in the North Atlantic (Figure 1). The North Atlantic has the full suite of processes that affect TEIs, including strong meridional advection, boundary scavenging and source effects, aeolian deposition, and the salty Mediterranean Outflow. The North Atlantic is particularly important as it lies at the "origin" of the global Meridional Overturning Circulation.

It is well understood that many trace metals play important roles in biogeochemical processes and the carbon cycle, yet very little is known about their large-scale distributions and the regional scale processes that affect them. Recent advances in sampling and analytical techniques, along with advances in our understanding of their roles in enzymatic and catalytic processes in the open ocean provide a natural opportunity to make substantial advances in our understanding of these important elements. Moreover, we are motivated by the prospect of global change and the need to understand the present and future workings of the ocean's biogeochemistry. The GEOTRACES strategy is to measure a broad suite of TEIs to constrain the critical biogeochemical processes that influence their distributions. In addition to these "exotic" substances, more traditional properties, including macronutrients (at micromolar and nanomolar levels), CTD, bio-optical parameters, and carbon system characteristics will be measured. The cruise starts at Line W, a repeat hydrographic section southeast of Cape Cod, extends to Bermuda and subsequently through the North Atlantic oligotrophic subtropical gyre, then transects into the African coast in the northern limb of the coastal upwelling region. From there, the cruise goes northward into the Mediterranean outflow. The station locations shown on the map are for the "fulldepth TEI" stations, and constitute approximately half of the stations to be ultimately occupied.

Figure 1. The proposed 2010 Atlantic GEOTRACES cruise track plotted on dissolved oxygen at 400 m depth. Data from the World Ocean Atlas (Levitus et al., 2005) were plotted using Ocean Data View (courtesy Reiner Schlitzer). [click on the image to view a larger version]

Hydrography, CTD and nutrient measurements will be supported by the Ocean Data Facility (J. Swift) at Scripps Institution of Oceanography and funded through NSF Facilities. They will be providing an additional CTD rosette system along with nephelometer and LADCP. A trace metal clean Go-Flo Rosette and winch will be provided by the group at Old Dominion University (G. Cutter) along with a towed underway pumping system.

The North Atlantic Transect cruise began in 2010 with KN199 leg 4 (station sampling) and leg 5 (underway sampling only) (Figure 2).

KN199-04 Cruise Report (PDF)

Figure 2. The red line shows the cruise track for the first leg of the US Geotraces North Atlantic Transect on the R/V Knorr in October 2010.  The rest of the stations (beginning with 13) will be completed in October-December 2011 on the R/V Knorr (courtesy of Bill Jenkins, Chief Scientist, GNAT first leg). [click on the image to view a larger version]
Atlantic Transect Station location map

The section completion effort resumed again in November 2011 with KN204-01A,B (Figure 3).

KN204-01A,B Cruise Report (PDF)

Figure 3. Station locations occupied on the US Geotraces North Atlantic Transect on the R/V Knorr in November 2011.  [click on the image to view a larger version]
Atlantic Transect/Part 2 Station location map

Data from the North Atlantic Transect cruises are available under the Datasets heading below, and consensus values for the SAFe and North Atlantic GEOTRACES Reference Seawater Samples are available from the GEOTRACES Program Office: Standards and Reference Materials

ADCP data are available from the Currents ADCP group at the University of Hawaii at the links below:
KN199-04   (leg 1 of 2010 cruise; Lisbon to Cape Verde)
KN199-05   (leg 2 of 2010 cruise; Cape Verde to Charleston, NC)
KN204-01A (part 1 of 2011 cruise; Woods Hole, MA to Bermuda)
KN204-01B (part 2 of 2011 cruise; Bermuda to Cape Verde)



[ table of contents | back to top ]

Program Information

U.S. GEOTRACES (U.S. GEOTRACES)


Coverage: Global


GEOTRACES is a SCOR sponsored program; and funding for program infrastructure development is provided by the U.S. National Science Foundation.

GEOTRACES gained momentum following a special symposium, S02: Biogeochemical cycling of trace elements and isotopes in the ocean and applications to constrain contemporary marine processes (GEOSECS II), at a 2003 Goldschmidt meeting convened in Japan. The GEOSECS II acronym referred to the Geochemical Ocean Section Studies To determine full water column distributions of selected trace elements and isotopes, including their concentration, chemical speciation, and physical form, along a sufficient number of sections in each ocean basin to establish the principal relationships between these distributions and with more traditional hydrographic parameters;

* To evaluate the sources, sinks, and internal cycling of these species and thereby characterize more completely the physical, chemical and biological processes regulating their distributions, and the sensitivity of these processes to global change; and

* To understand the processes that control the concentrations of geochemical species used for proxies of the past environment, both in the water column and in the substrates that reflect the water column.

GEOTRACES will be global in scope, consisting of ocean sections complemented by regional process studies. Sections and process studies will combine fieldwork, laboratory experiments and modelling. Beyond realizing the scientific objectives identified above, a natural outcome of this work will be to build a community of marine scientists who understand the processes regulating trace element cycles sufficiently well to exploit this knowledge reliably in future interdisciplinary studies.

Expand "Projects" below for information about and data resulting from individual US GEOTRACES research projects.



[ table of contents | back to top ]

Funding

Funding SourceAward
National Aeronautics & Space Administration (NASA)

[ table of contents | back to top ]