Contributors | Affiliation | Role |
---|---|---|
Arnosti, Carol | University of North Carolina at Chapel Hill (UNC-Chapel Hill) | Principal Investigator |
Copley, Nancy | Woods Hole Oceanographic Institution (WHOI BCO-DMO) | BCO-DMO Data Manager |
This dataset includes polysaccharide hydrolysis rates measured in bulk (not filter-fractionated) seawater. Links to archived CTD data are also provided.
Water was collected via Niskin bottles mounted on a rosette, equipped with a CTD.
The potential of the seawater microbial community to hydrolyze six high-molecular-weight polysaccharides (arabinogalactan, chondroitin sulfate, fucoidan, laminarin, pullulan, and xylan) was investigated in surface and bottom water. For each substrate, three 15 mL falcon tubes were filled with seawater and one 15 mL falcon tube was filled with autoclaved seawater to serve as a killed control. Substrate was added at 3.5 uM monomer-equivalent concentrations. Two 15 mL falcon tubes – one with seawater and one with autoclaved seawater – with no added substrate served as blank controls. Incubations were stored in the dark at 0 C. Subsamples of the incubations were collected at time zero, and at 120h, 240 h, 360 h, and 600 h. At each timepoint, 2 mL of seawater was collected from the 15 mL falcon tube using a sterile syringe, filtered through a 0.2 um pore size syringe filter, and stored frozen until processing.
The hydrolysis of high molecular weight substrate to lower molecular weight hydrolysis products was measured using gel permeation chromatography with fluorescence detection, after the method of Arnosti [1996, 2003]. In short, the subsample was injected onto a series of columns consisting of a 21 cm column of G50 and a 19 cm column of G75 Sephadex gel. The fluorescence of the column effluent was measured at excitation and emission wavelengths of 490 and 530 nm, respectively. Hydrolysis rates were calculated from the change in molecular weight distribution of the substrate over time, as described in detail in Arnosti [2003].
BCO-DMO Processing Notes:
- added conventional header with dataset name, PI name, version date
- reduced decimal precision of rate columns from 9 to 6 places
File |
---|
ARK27-3_bulk_FLA_joined.csv (Comma Separated Values (.csv), 81.18 KB) MD5:18694b95ab578798167ab5358c396abd Primary data file for dataset ID 742235 |
Parameter | Description | Units |
station_no | refers to station number for cruise | unitless |
depth_no | sequence of depths sampled (1 is surface; higher numbers at greater depths) | unitless |
depth_m | actual depth at which water collected | meters |
cast_no | cast number (refers to cast of CTD/Niskin bottles on cruise) | unitless |
ISO_DateTime_UTC | date and time in ISO format (yyyy-mm-ddTHH:MM:SS | unitless |
Latitude | latitude; north is positive | decimal degreed |
Longitude | longitude; east is postivie | decimal degreed |
substrate | substrates for measurement of enzymatic activities. ara:arabinogalactan; chn:chondroitin sulfate; fuc:fucoidan; lam:laminarin ; pul:pullulan; xyl:xylan | unitless |
timepoint | sampling point post-incubation | unitless |
time_elapsed_hr | incubation time | hours |
rep1_rate | replicate 1 hydrolysis rate | nanomoles/liter/hour (nmol L-1 h-1) |
rep2_rate | replicate 2 hydrolysis rate | nanomoles/liter/hour (nmol L-1 h-1) |
rep3_rate | replicate 3 hydrolysis rate | nanomoles/liter/hour (nmol L-1 h-1) |
average | average of hydrolysis rates | nanomoles/liter/hour (nmol L-1 h-1) |
std_dev | std deviation of hydrolysis rates | nanomoles/liter/hour (nmol L-1 h-1) |
comments | url of CTD data in Pangaea database | unitless |
Dataset-specific Instrument Name | |
Generic Instrument Name | CTD - profiler |
Generic Instrument Description | The Conductivity, Temperature, Depth (CTD) unit is an integrated instrument package designed to measure the conductivity, temperature, and pressure (depth) of the water column. The instrument is lowered via cable through the water column. It permits scientists to observe the physical properties in real-time via a conducting cable, which is typically connected to a CTD to a deck unit and computer on a ship. The CTD is often configured with additional optional sensors including fluorometers, transmissometers and/or radiometers. It is often combined with a Rosette of water sampling bottles (e.g. Niskin, GO-FLO) for collecting discrete water samples during the cast.
This term applies to profiling CTDs. For fixed CTDs, see https://www.bco-dmo.org/instrument/869934. |
Dataset-specific Instrument Name | |
Generic Instrument Name | Fluorometer |
Generic Instrument Description | A fluorometer or fluorimeter is a device used to measure parameters of fluorescence: its intensity and wavelength distribution of emission spectrum after excitation by a certain spectrum of light. The instrument is designed to measure the amount of stimulated electromagnetic radiation produced by pulses of electromagnetic radiation emitted into a water sample or in situ. |
Dataset-specific Instrument Name | |
Generic Instrument Name | Gel Permeation Chromatograph |
Generic Instrument Description | Instruments that separate components in aqueous or organic solution based on molecular size generally for molecular weight determination. Gel permeation chromatography (GPC) is a type of size exclusion chromatography (SEC), that separates analytes on the basis of size. |
Dataset-specific Instrument Name | |
Generic Instrument Name | Niskin bottle |
Generic Instrument Description | A Niskin bottle (a next generation water sampler based on the Nansen bottle) is a cylindrical, non-metallic water collection device with stoppers at both ends. The bottles can be attached individually on a hydrowire or deployed in 12, 24, or 36 bottle Rosette systems mounted on a frame and combined with a CTD. Niskin bottles are used to collect discrete water samples for a range of measurements including pigments, nutrients, plankton, etc. |
Website | |
Platform | R/V Polarstern |
Start Date | 2012-08-02 |
End Date | 2012-10-08 |
Description | Project: Latitudinal and depth-related contrasts in enzymatic capabilities of pelagic microbial communities: Predictable patterns in the ocean?
For other files related to this cruise, see https://www.pangaea.de/?q=ARK+XXVII%2F3. |
NSF Award Abstract:
Heterotrophic microbial communities are key players in the marine carbon cycle, transforming and respiring organic carbon, regenerating nutrients, and acting as the final filter in sediments through which organic matter passes before long-term burial. Microbially-driven carbon cycling in the ocean profoundly affects the global carbon cycle, but key factors determining rates and locations of organic matter remineralization are unclear. In this study, researchers from the University of North Carolina at Chapel Hill will investigate the ability of pelagic microbial communities to initiate the remineralization of polysaccharides and proteins, which together constitute a major pool of organic matter in the ocean. Results from this study will be predictive on a large scale regarding the nature of the microbial response to organic matter input, and will provide a mechanistic framework for interpreting organic matter reactivity in the ocean.
Broader Impacts: This study will provide scientific training for undergraduate and graduate students from underrepresented groups. The project will also involve German colleagues, thus strengthening international scientific collaboration.
Funding Source | Award |
---|---|
NSF Division of Ocean Sciences (NSF OCE) |