* Sea-Bird SBE 9 Data File:
* FileName = C:CTDdataPE08-0610.hex
* Software Version Seasave V 7.12
* Temperature SN = 4511
* Conductivity SN = 043044
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Aug 01 2007 02:48:27
* NMEA Latitude = 28 45.17 N
* NMEA Longitude = 090 27.62 W
* NMEA UTC (Time) = Aug 01 2007 01:48:25
* Store Lat/Lon Data = Append to Every Scan
** Ship:
** Station:
** Operator:
# nquan = 14
# nvalues = 2302
# units = specified
# name 0 = timeS: Time, Elapsed [seconds]
# name 1 = depSM: Depth [salt water, m]
# name 2 = prDM: Pressure, Digiquartz [db]
# name 3 = t090C: Temperature [ITS-90, deg C]
# name 4 = c0mS/cm: Conductivity [mS/cm]
# name 5 = sal00: Salinity [PSU]
# name 6 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 7 = sbeox1Mg/L: Oxygen, SBE 43, 2 [mg/l]
# name 8 = par: PAR/Irradiance, Biospherical/Licor
# name 9 = spar: SPAR/Surface Irradiance
# name 10 = flScufa: Fluorescence, Turner SCUFA [ug/L]
# name 11 = latitude: Latitude [deg]
# name 12 = longitude: Longitude [deg]
# name 13 = flag: 0.000e+00
# span 0 = 0.000, 95.875
# span 1 = 0.782, 17.013
# span 2 = 0.788, 17.128
# span 3 = 28.5100, 29.6287
# span 4 = 50.073039, 57.558735
# span 5 = 29.7112, 35.5415
# span 6 = 2.18439, 6.54479
# span 7 = 1.87443, 5.99733
# span 8 = 1.0000e-12, 2.0921e+00
# span 9 = 6.3333e+00, 1.0556e+01
# span 10 = 0.2454, 0.5482
# span 11 = 28.75282, 28.75298
# span 12 = -90.46058, -90.46032
# span 13 = 0.0000e+00, 0.0000e+00
# interval = seconds: 0.0416667
# start_time = Aug 01 2007 02:48:27
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0 temperature, primary, 4511, 16 MAR 07
# sensor 1 = Frequency 1 conductivity, primary, 043044, 14 MAR 07, cpcor = -9.5700e-08
# sensor 2 = Frequency 2 pressure, 0797, 30-June-06
# sensor 3 = Frequency 3 temperature, secondary, 1811, 11 JUL 06
# sensor 4 = Frequency 4 conductivity, secondary, 3079, 14 JUL 06, cpcor = -9.5700e-08
# sensor 5 = Extrnl Volt 0 Oxygen, SBE, primary, 0769, 19 JUL 06
# sensor 6 = Extrnl Volt 1 Oxygen, SBE, secondary, 0803, 13-APR-06
# sensor 7 = Extrnl Volt 2 irradiance (PAR), primary, 4560, 06 JAN 06
# sensor 8 = Extrnl Volt 4 altimeter
# sensor 9 = Extrnl Volt 5 transmissometer, primary, CST-868DR, 1/24/06
# sensor 10 = Extrnl Volt 6 Fluorometer, Turner, SCUFA, primary
# sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0
# datcnv_date = Aug 17 2007 09:08:08, 7.12
# datcnv_in = C:Data2007NGOMEXCTD10.hex C:Data2007NGOMEXCTD10.CON
# datcnv_skipover = 0
# file_type = ascii
*END*