* Sea-Bird SBE 9 Data File:
* FileName = C:SeasaveRawCTD_2009Minor August 2009CM_CTD_3.dat
* Software Version Seasave Win32 V 5.37d
* Temperature SN = 2723
* Conductivity SN = 2271
* Number of Bytes Per Scan = 34
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Aug 17 2009 19:37:28
* NMEA Latitude = 48 01.46 N
* NMEA Longitude = 087 44.18 W
* NMEA UTC (Time) = Aug 18 2009 00:35:26
* Store Lat/Lon Data = Append to Every Scan
** Ship:
** Cruise:
** Station:
** Latitude:
** Longitude:
# nquan = 18
# nvalues = 39
# units = specified
# name 0 = prDM: Pressure, Digiquartz [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = specc: Specific Conductance [uS/cm]
# name 4 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]
# name 5 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3]
# name 6 = dz/dtM: Descent Rate [m/s]
# name 7 = ph: pH
# name 8 = par: PAR/Irradiance, Biospherical/Licor
# name 9 = sal00: Salinity [PSU]
# name 10 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]
# name 11 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 12 = wetCDOM: Fluorescence, Wetlab CDOM [mg/m^3]
# name 13 = latitude: Latitude [deg]
# name 14 = longitude: Longitude [deg]
# name 15 = scan: Scan Count
# name 16 = nbin: number of scans per bin
# name 17 = flag: flag
# span 0 = 1.000, 20.000
# span 1 = 7.0623, 12.0315
# span 2 = 64.132533, 73.646530
# span 3 = 99.383, 100.012
# span 4 = 91.6167, 92.9582
# span 5 = 2.8281, 3.5282
# span 6 = -0.545, 0.538
# span 7 = 8.881, 9.099
# span 8 = 2.1303e+01, 3.9394e+02
# span 9 = 0.0457, 0.0478
# span 10 = 323.448, 364.124
# span 11 = 10.34538, 11.65107
# span 12 = 0.5253, 0.7231
# span 13 = 48.02437, 48.02448
# span 14 = -87.73652, -87.73646
# span 15 = 257, 3550
# span 16 = 29, 118
# span 17 = 0.0000e+00, 0.0000e+00
# interval = decibars: 1
# start_time = Aug 17 2009 19:37:28
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0 temperature, 2723, 12 Feb 2009
# sensor 1 = Frequency 1 conductivity, 2271, 10 Feb 2009, cpcor = -9.5700e-08
# sensor 2 = Frequency 2 pressure, 75869, 31 Mar 2009
# sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 0471, 06 Feb 2009
# sensor 4 = Extrnl Volt 1 WET Labs, CDOM
# sensor 5 = Extrnl Volt 2 pH, 270135, 30 Mar 2009
# sensor 6 = Extrnl Volt 3 oxidation reduction potential, 270135, 30 Mar 2009
# sensor 7 = Extrnl Volt 4 transmissometer, primary, CST-268PR, 25 Mar 2009
# sensor 8 = Extrnl Volt 5 WET Labs, WETStar fluorometer, WS3S-553P, 10 Mar 2009
# sensor 9 = Extrnl Volt 6 altimeter
# sensor 10 = Extrnl Volt 7 irradiance (PAR), primary, 4554, 18 Mar 2009
# sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0
# datcnv_date = Aug 24 2009 09:09:53, 5.37e
# datcnv_in = C:SeasaveRawCTD_2009Minor August 2009CM_CTD_3.dat C:SeasaveConfiguration Files2009May2009-2.con
# datcnv_skipover = 0
# filter_date = Aug 24 2009 09:50:29, 5.37e
# filter_in = C:SeasaveConverted DataCM_CTD_3.cnv
# filter_low_pass_tc_A = 0.150
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars = prDM
# filter_low_pass_B_vars =
# loopedit_date = Aug 24 2009 10:27:40, 5.37e
# loopedit_in = C:SeasaveFilterCM_CTD_3f.cnv
# loopedit_minVelocity = 0.100
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = yes
# binavg_date = Aug 24 2009 10:55:55, 5.37e
# binavg_in = C:SeasaveLoop EditCM_CTD_3fl.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*