Dataset: Byssal Thread Tests - All Breaks
Deployment: lab_UW_FHL_OAEL_Carrington

Material properties of mussel byssal threads formed under different pH - All Breaks

Principal Investigator:

Emily Carrington (University of Washington, FHL)

Contact:

Emily Carrington (University of Washington, FHL)

BCO-DMO Data Manager:

Stephen R. Gegg (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Project:

Effects of Ocean Acidification on Coastal Organisms: An Ecomaterials Perspective (OA - Ecomaterials Perspective)

Current State:

Preliminary and in progress

Version:

27 August 2013

Version Date:

2013-08-27

Data URL:

https://osprey.bco-dmo.org/dataset-deployment/456068/data

Expand/Collapse All

Description

Material properties of mussel byssal threads formed under different pH - All Breaks

See O`Donnell et al., 2013

Methods & Sampling

Dataset acquisition description

For testing, an individual thread was excised from the byssus, with care taken to avoid loading the thread. The pebble to which the plaque was attached was epoxied to an aluminium bracket and the root of the thread was secured between cardboard with cyanoacrylate. The cardboard and aluminium bracket were secured in the clamps of an Instron 5565 materials testing frame. Byssal threads were tested while submerged in a 10 °C seawater bath by pulling normal to the substratum at 10 mm min⁻¹ until failure following ref. Thread strength, extensibility and failure location were recorded and unbroken thread portions were subsequently retested to measure distal yield and force to break plaque and proximal regions. Distal region failures were rare and excluded.

Data Processing Description

Dataset Processing Description

These data are raw data from the measurement device.

BCO-DMO Processing/Edits
- Generated from original file "Mussel Byssus final data for release 2013 07 10.xlsx", Sheet: "All" contributed by Emily Carrington
- Parameter names changed to conform to BCO-DMO parameter naming convention
- "Max Stress" column deleted
- Data values standardized to max number of decimal places reported for each parameter
- Approx Latitude, Longitude location for Friday Harbor Laboratory added to the data
- "nd" inserted into blank cells

More information about this dataset deployment

Funding

Award Number	Funding Source
OCE-1041213	NSF Division of Ocean Sciences

Instruments

Conductivity Meter

Supplied Name: Hach Sension 5 conductivity meter

Supplied Description:

Hach Sension 5 conductivity meter

sensION5 Conductivity Meter, with electrode, 1-meter cable
Product #: 5180010

OBSOLETE ITEM
Fast Response
Quick single-piont calibration
All-in-one 5-pin connector
Recall/download/print data via built-n RS232 serial ports (sensION5) or via optional docking station (sensION7)
Also measures Salinity and TDS
Specifications
Conductivity resolution:         0.1 µS, 1 µS, 0.01 mS, 0.1 mS
Measuring Range Conductivity:    0 to 199.9 ?S/cm
Measuring Range Conductivity 2:  200 to 1999 ?S/cm
Measuring Range Conductivity 3:  2 to 19.99 mS/cm
Measuring Range Conductivity 4:  20 to 199.9 mS/cm
Measuring Range Salinity:        0 to 42 g/L (ppt)
Measuring Range TDS:             0 to 50000 mg/L as NaCl
Measuring Range Temperature:    -10 to 110 °C
Salinity Resolution:             0.1 g/L (ppt)
TDS Resolution:                  3 significatn digits
Temperature Resolution:          ± 0.1 °C
Warranty:                        2 years
Weight:                          5 lbs. (2.27 kg)

Instrument Type

Generic Name: Conductivity Meter

Generic Description:

Conductivity Meter - An electrical conductivity meter (EC meter) measures the electrical conductivity in a solution. Commonly used in hydroponics, aquaculture and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.

Gas Analyzer

Supplied Name: Licor LI-700 CO2 detector

Supplied Description:

Licor LI-700 CO2 detector

Instrument Type

Generic Name: Gas Analyzer

Generic Description:

Gas Analyzers - Instruments for determining the qualitative and quantitative composition of gas mixtures.

Materials Testing System

Supplied Name: Instron 5565 materials testing frame

Supplied Description:

Instron 5565 materials testing frame

Instrument Type

Generic Name: Materials Testing System

Generic Description:

Testing systems that are used to test a wide range of materials in tension or compression.

Water Temperature Sensor

Supplied Name: Fluke 1523 thermometer

Supplied Description:

Fluke 1523 thermometer
Single channel that reads RTD's (PRTs), thermocouples, and thermistors. Featuring visual data trending and records the values and statistics associated with up to 25 measurements.

Specifications
Product Type 	           Multi-Parameter Thermometers
Temp range 	           probe dependent
Battery life 	           20 hours (minimum)
Power 	                   3 AA Batteries
RTD Resistance Accuracy    0.004% + 0.002 ohm percent of reading + floor
Dimensions 	           96x200x47
Brand 	                   Hart Scientific
Manufacturer number 	   1523-156
Model 	                   1523

Instrument Type

Generic Name: Water Temperature Sensor

Acronym: Water Temp Sensor

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/134/

Generic Description:

General term for an instrument that measures the temperature of the water with which it is in contact (thermometer).

Parameters

Supplied Name	Supplied description	Supplied Units	Standard Name
Lab_Id	Laboratory identifier where experiments were conducted	dimensionless	laboratory
Lat	Latitude of laboratory (South is negative)	decimal degrees	lat
Lon	Longitude of laboratory (West is negative)	decimal degrees	lon
Indiv	Individual Identifier	dimensionless	individual
Cooler	Cooler Identifier	dimensionless	cooler
Tank	Tank Identifier	dimensionless	tank
pCO2	pCO2	uatm	pCO2
pCO2_SD	pCO2 Standard of Deviation (+/-)	uatm	pCO2
pH	pH	total scale	pH
pH_average_dev	pH Average Deviation (+/-)	total scale	pH
GI	The ratio of dried gonadal tissue to total tissue mass. A proxy for reproductive investment	unitless (proportion)	no_bcodmo_term
CI	Dried tissue mass divided by shell length cubed	gram/cm^3	no_bcodmo_term
Order	Order	integer	no_bcodmo_term
Test_Type	Test_Type (Which Test is This?)	text	no_bcodmo_term
Thread_Break_Location	Thread_Break_Location (Where Did the Thread Break?)	text	no_bcodmo_term
Thread_Break_Pattern	Thread Break Pattern	text	no_bcodmo_term
Distal_Diameter	Distal Diameter	mm	no_bcodmo_term
L0	L0	mm	no_bcodmo_term
Lfinal	Lfinal	mm	no_bcodmo_term
Max_Strain	Max Strain	unitless (proportion)	no_bcodmo_term
Max_Load	Max Load	Newtons (N)	no_bcodmo_term
Extension	Extension	mm	no_bcodmo_term
Yield	Yield	Newtons (N)	no_bcodmo_term

Database

Contribute Data

Dataset: Byssal Thread Tests - All Breaks
Deployment: lab_UW_FHL_OAEL_Carrington

Dataset acquisition description

Dataset Processing Description

Database

Contribute Data

Dataset: Byssal Thread Tests - All BreaksDeployment: lab_UW_FHL_OAEL_Carrington

Dataset acquisition description

Dataset Processing Description

Dataset: Byssal Thread Tests - All Breaks
Deployment: lab_UW_FHL_OAEL_Carrington