Dataset: Profile data from WireWalker
Deployment: QuIPP_2016

View Data: For data, See Dataset Metadata Page: https://osprey.bco-dmo.org/dataset/742124

Principal Investigator:

Peter Franks (University of California-San Diego, UCSD-SIO)

Co-Principal Investigator:

Andrew J Lucas (University of California-San Diego, UCSD-SIO)

Contact:

Jessica C. Garwood (University of California-San Diego, UCSD-SIO)

BCO-DMO Data Manager:

Amber D. York (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Project:

Quantifying plankton dynamics in the internal tide using swarms of buoyancy-controlled robots (QuIPP)

Version:

Expand/Collapse All

Description

Profile data from WireWalker deployments at Mission Beach, California in 2016 at a 50m depth.

The default data format served through the BCO-DMO data system is tabular. These data are available to download as matrices in NetCDF (.nc) and Matlab (.mat) files in the "Data Files" section of this page.

Related Datasets (Jun 2016, Mission Beach, CA)

* Thermistor chain https://www.bco-dmo.org/dataset/742137
* ADCP https://www.bco-dmo.org/dataset/742132

Methods & Sampling

Dataset acquisition description

Instruments were mounted on a WireWalker profiler (http://delmarocean.com/wirewalker/) and data collected during ascent only. The interval between profiles was dependent on sea state. The WireWalker instrument was deployed on 50-m depth contour off Mission Beach, CA near a thermistor chain and in line with Internal Waves on the Continental Margin (IWAVES) stations. For more information about IWAVES stations see Lerczark, 2001.

Data Processing Description

Dataset Processing Description

Data interpolated on common depth and time grid.

Issues: Aquadopp data was corrupted and so was omitted.

BCO-DMO Data Manager Processing Notes:
* added a conventional header with dataset name, PI name, version date
* modified parameter names to conform with BCO-DMO naming conventions
* blank values in this dataset are displayed as "nd" for "no data." nd is the default missing data identifier in the BCO-DMO system.
* created tabular version of data by converting Matlab struct to a Matlab Table type then exported as csv.
* rounded matlab double values to three decimal places before writing to csv.
* On the first day (2018-06-13) records are ommitted in the tabular version of the data. All values (except depth &time) were NaN values.

More information about this dataset deployment

Funding

Award Number	Funding Source
OCE-1459393	NSF Division of Ocean Sciences

Instruments

Data Logger

Supplied Name: RBRMaestro

Supplied Description:

Instrument Type

Generic Name: Data Logger

Generic Description:

Electronic devices that record data over time or in relation to location either with a built-in instrument or sensor or via external instruments and sensors.

Fluorometer

Supplied Name: WET Labs fluorometer and ECO puck

Supplied Description:

Instrument Type

Generic Name: Fluorometer

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/113/

Generic Description:

A fluorometer or fluorimeter is a device used to measure parameters of fluorescence: its intensity and wavelength distribution of emission spectrum after excitation by a certain spectrum of light. The instrument is designed to measure the amount of stimulated electromagnetic radiation produced by pulses of electromagnetic radiation emitted into a water sample or in situ.

Oxygen Sensor

Supplied Name: RINKO III

Supplied Description:

Instrument Type

Generic Name: Oxygen Sensor

Acronym: Dissolved Oxygen Sensor

Generic Description:

An electronic device that measures the proportion of oxygen (O2) in the gas or liquid being analyzed

Parameters

Supplied Name	Supplied description	Supplied Units	Standard Name
dnum	Matlab time/date format (datenum, UTC)	unitless	DateTime
date	Date (UTC) in format 'yyyy-mm-dd'	unitless	date
time	Time (UTC) in format 'HH:MM:SS'	unitless	time
ISO_DateTime_UTC	Timestamp (UTC) in standard ISO 8601:2004(E) format YYYY-mm-ddTHH:MMZ	unitless	ISO_DateTime_UTC
depth	depth	meters (m)	depth
DO	dissolved oxygen saturation	percent (%)	O2
B	backscatter	counts	Acc_bksctr
chl	chlorophyll (fluorescence)	counts	chl_a
phyco	phycoerythrin	counts	phyco
C	conductivity	millisiemens per centimeter (mS/cm)	cond
T	temperature	degrees Celsius	temp
P	pressure	decibars (dbar)	press
S	salinity	Practical Salinity Units (PSU)	sal
rho	density	kilograms per meter cubed (kg/m3)	density
n2	buoyancy frequency	per seconds squared (s-2)	no_bcodmo_term
dPt	dPdt	decibars per second (dbar/s)	no_bcodmo_term
mask	Mask (values 0 or 1) indicating the reliability of interpolated values. NaN values in the mask indicate times when there was a significant gap between profiles, and where the interpolation may be less reliable. For best data, one should focus on points when the mask value is equal to 1.	unitless	q_flag

Database

Contribute Data

Dataset: Profile data from WireWalker
Deployment: QuIPP_2016

Dataset acquisition description

Dataset Processing Description

Database

Contribute Data

Dataset: Profile data from WireWalkerDeployment: QuIPP_2016

Dataset acquisition description

Dataset Processing Description

Dataset: Profile data from WireWalker
Deployment: QuIPP_2016