Dataset: GN01 Se Particulate
Deployment: HLY1502

2015 GEOTRACES GN01 Healy HLY1502 Depth Profiles Total Particulate Selenium

View Data: For data, See Dataset Metadata Page: https://osprey.bco-dmo.org/dataset/778856

Principal Investigator:

Gregory A. Cutter (Old Dominion University, ODU)

BCO-DMO Data Manager:

Shannon Rauch (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Project:

GEOTRACES Arctic Section: Processes affecting the biogeochemical cycling of essential and toxic metalloids in the Arctic Ocean (GEOTRACES Arctic Arsenic and Selenium)

U.S. Arctic GEOTRACES Study (GN01) (U.S. GEOTRACES Arctic)

Version:

Deployment Synonyms:

GN01, U.S. GEOTRACES Arctic, 32H120150809

Expand/Collapse All

Description

Data have been submitted to BCO-DMO and are currently being processed (2019-10-09).

Methods & Sampling

Dataset acquisition description

Particulate samples were collected using McLane in situ pumps (P. Lam, UCSC) at various depths (Bishop et al., 2012), with splits (ca. 1/16 section) from a 0.8 µm Supor filter processed and immediately frozen for storage and return to the ODU Lab. The volume of water that passed through each filter was recorded by the pumps.

Water column particulate filters were solubilized using the nitric-perchloric acid reflux digestion procedure described by Cutter (1985) but using a microwave digestion unit. The digestion solutions were analyzed using the selective hydride generation method given in Cutter (1978, 1985). The detection limit for total particulate Se, assuming an average filtration volume of 24 liters, was 0.001 nmol/L, with an accuracy of 85±17 % recovery of the BCR 277R estuarine sediment standard reference material (3s, n=19) and a precision of 11% (RSD) at 0.001 nmol/L.

Data Processing Description

Dataset Processing Description

Only one filter was digested per depth, but the digestion solutions were analyzed in triplicate and means computed. Standard additions of selenite were used for daily calibration on a representative sample and its slope applied to subsequent samples.

More information about this dataset deployment

Funding

Award Number	Funding Source
OCE-1435708	NSF Division of Ocean Sciences

Instruments

McLane Pump

Supplied Name: McLane in situ pumps

Supplied Description:

Instrument Type

Generic Name: McLane Pump

Generic Description:

McLane pumps sample large volumes of seawater at depth. They are attached to a wire and lowered to different depths in the ocean. As the water is pumped through the filter, particles suspended in the ocean are collected on the filters. The pumps are then retrieved and the contents of the filters are analyzed in a lab.

Parameters

Supplied Name	Supplied description	Supplied Units	Standard Name
STNNBR	Station number	unitless	station
GEOTRC_INSTR	Sampling device	unitless	instrument
GEOTRC_EVENTNO	GEOTRACES event number	unitless	event
GEOTRC_CASTNO	Cast number	unitless	cast
GEOTRC_SAMPNO	GEOTRACES sample number	unitless	sample
ISO_DATETIME_GMT	Date and time (GMT) in ISO8601 format: yyyy-mm-ddTHH:MM:SS.xx	unitless	ISO_DateTime_UTC
LATITUDE	Latitude; positive values = North	decimal degrees	lat
LONGITUDE	Longitude; positive values = East	decimal degrees	lon
DEPTH	Sample depth	meters	depth
Se_TP_CONC_PUMP	Total particulate selenium	nanomoles per liter (nmol/L)	trace_metal_conc
Se_TP_CONC_PUMP_ERR	Standard error for Se_TP_CONC_PUMP	nanomoles per liter (nmol/L)	trace_metal_conc
Se_TP_CONC_PUMP_FLAG	Quality flag for Se_TP_CONC_PUMP	unitless	q_flag

Database

Contribute Data

Dataset: GN01 Se Particulate
Deployment: HLY1502

Dataset acquisition description

Dataset Processing Description

Database

Contribute Data

Dataset: GN01 Se ParticulateDeployment: HLY1502

Dataset acquisition description

Dataset Processing Description

Dataset: GN01 Se Particulate
Deployment: HLY1502