Dataset: Table 1 - Physical and chemical parameters during egg experiments

Name: Table 1: Physical and chemical parameters during Calanus finmarchicus and Meganyctiphanes norvegica egg hatching experiments, 2011-2012
Published: 2018-06-13
Keywords: oceans

Cite This Dataset

DOI:10.1575/1912/bco-dmo.738447.1

Spatial Extent: N:43.7474 E:-69.501 S:43.7474 W:-69.501

Temporal Extent: 2011-05-26 - 2012-08-01

Project:

Ocean Acidification-Category 1- Impact of ocean acidification on survival of early life stages of planktonic copepods in the genus Calanus in the northern (OA Calanus Survival)

Program:

Science, Engineering and Education for Sustainability NSF-Wide Investment (SEES): Ocean Acidification (formerly CRI-OA) (SEES-OA)

Ocean Carbon and Biogeochemistry (OCB)

Principal Investigator:

John P Christensen (Green Eyes LLC)

Co-Principal Investigator:

Jeffrey A. Runge (Gulf of Maine Research Institute, GMRI)

BCO-DMO Data Manager:

Nancy Copley (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Version:

Version Date:

2018-06-13

Restricted:

Validated:

Yes

Current State:

Final no updates expected

Table 1: Physical and chemical parameters during Calanus finmarchicus and Meganyctiphanes norvegica egg hatching experiments, 2011-2012

Abstract:

During eggs experiments, the general conditions within the tanks were monitored using electrodes for temperature, pH and its millivolt output, salinity, and dissolved oxygen. Results are published in Preziosi et al (2017), Table 1.

Expand/Collapse All

Archival Copy

Version Date	Archive	Persistent Identifier (PID)	Date PID Issued
2018-06-13	Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)	10.1575/1912/bco-dmo.738447.1	2019-12-04

Description

During the eggs experiments, the general conditions within the tanks were monitored using electrodes for temperature, pH and its millivolt output, salinity, and dissolved oxygen. Results are published in Preziosi et al (2017), Table 1.

Methods & Sampling

The sensors were a model 55 YSI dissolved oxygen meter and an Orion Four Star pH conductivity meter using a gel-filled model number 9107WMMD pH/ATC Triode. Each instrument was calibrated according to the normal manufacturer's instructions using off the shelf calibration solutions. During and following experiment 8, the pH electrode readings appeared abnormal and are likely invalid. The electrode pH was only used as a guide for the sampling crew.

Data Processing Description

BCO-DMO Processing Notes:
- added conventional header with dataset name, PI name, version date
- modified parameter names to conform with BCO-DMO naming conventions
- hid separator rows (all -99), and duplicate columns
- added columns for ISO_DateTime_local and yrday_local

Data Files

File
table1.csv (Comma Separated Values (.csv), 31.77 KB) MD5:b44a26295294da89e56c3babc77d517d Primary data file for dataset ID 738447

More Information about this dataset

Funding Sources

Funding Source	Award Number
NSF Division of Ocean Sciences	OCE-1041081

Deployments

None available yet

Instruments

Benchtop pH Meter

Supplied Name: Orion Four Star pH conductivity meter

Supplied Description:

Used with a gel-filled model number 9107WMMD pH/ATC Triode

Instrument Type

Generic Name: Benchtop pH Meter

Generic Description:

An instrument consisting of an electronic voltmeter and pH-responsive electrode that gives a direct conversion of voltage differences to differences of pH at the measurement temperature. (McGraw-Hill Dictionary of Scientific and Technical Terms)

This instrument does not map to the NERC instrument vocabulary term for 'pH Sensor' which measures values in the water column. Benchtop models are typically employed for stationary lab applications.

Conductivity Meter

Supplied Name: Orion Four Start pH conductivity meter

Supplied Description:

Used to measure the approximate salinities.

Instrument Type

Generic Name: Conductivity Meter

Generic Description:

Conductivity Meter - An electrical conductivity meter (EC meter) measures the electrical conductivity in a solution. Commonly used in hydroponics, aquaculture and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.

Oxygen Sensor

Supplied Name: model 55 YSI dissolved oxygen meter

Supplied Description:

Used to measure dissolved oxygen in the experimental tanks.

Instrument Type

Generic Name: Oxygen Sensor

Acronym: Dissolved Oxygen Sensor

Generic Description:

An electronic device that measures the proportion of oxygen (O2) in the gas or liquid being analyzed

Parameters

Date and time formats are described in python strftime() syntax.

Supplied Name	Supplied description	Supplied Units	Standard Name
EXPERIMENT	Number of the experiment	unitless	exp_id
EVENT	Sampling or maintenance #	unitless	event
YEAR	Sampling date - year	year	year
MONTH	Sampling date - month	unitless	month
DAY	Sampling date - day	unitless	day
HR	Sampling time - hour of the day	unitless	hour_local
MIN	Sampling time - minutes of the hour	unitless	minute_local
TIME_elapsed	Time from internment of the eggs	hours	time_elapsed
PURPOSE	Sampling or maintenance type	unitless	comment
ROWTYPE	Labels of the subsequent rows	unitless	comment
TEMP_1	Temperature of the tank	degrees Celsius	temp
PH_1	pH in the tank	pH units	pH
PHMV_1	mv output of the pH electrode	millivolts	no_bcodmo_term
SAL_1	Salinity in the tank	parts per thousand (ppt)	sal
DO_1	Dissolved Oxygen in the tank	% saturation	O2_sat_pcnt
TEMP_2	Temperature of the tank	degrees Celsius	temp
PH_2	pH in the tank	pH units	pH
PHMV_2	mv output of the pH electrode	millivolts	no_bcodmo_term
SAL_2	Salinity in the tank	parts per thousand (ppt)	sal
DO_2	Dissolved Oxygen in the tank	% saturation	O2_sat_pcnt
TEMP_3	Temperature of the tank	degrees Celsius	temp
PH_3	pH in the tank	pH units	pH
PHMV_3	mv output of the pH electrode	millivolts	no_bcodmo_term
SAL_3	Salinity in the tank	parts per thousand (ppt)	sal
DO_3	Dissolved Oxygen in the tank	% saturation	O2_sat_pcnt
TEMP_4	Temperature of the tank	degrees Celsius	temp
PH_4	pH in the tank	pH units	pH
PHMV_4	mv output of the pH electrode	millivolts	no_bcodmo_term
SAL_4	Salinity in the tank	parts per thousand (ppt)	sal
DO_4	Dissolved Oxygen in the tank	% saturation	O2_sat_pcnt
TEMP_5	Temperature of the tank	degrees Celsius	temp
PH_5	pH in the tank	pH units	pH
PHMV_5	mv output of the pH electrode	millivolts	no_bcodmo_term
SAL_5	Salinity in the tank	parts per thousand (ppt)	sal
DO_5	Dissolved Oxygen in the tank	% saturation	O2_sat_pcnt
COMMENTS	investigator notes	unitless	comment
ISO_DateTime_local	ISO-formatted date and time		ISO_DateTime_Local
yrday_local	local day and decimal time, as 326.5 for the 326th day of the year, or November 22 at 1200 hours (noon).	unitless	yrday_local