Dataset: bottle_KN207-01
Deployment: KN207-01

Niskin bottle data from cruise KN207-01.

Principal Investigator:

Benjamin A.S. Van Mooy (Woods Hole Oceanographic Institution, WHOI)

BCO-DMO Data Manager:

Shannon Rauch (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Project:

Biogeochemical Impact and Fate of Non-phosphorus Membrane Lipids in the Sargasso Sea (SargassoSeaLipids)

Current State:

Final no updates expected

Version:

13 Nov 2012

Deployment Synonyms:

BLATZ II

Version Date:

2012-11-13

Data URL:

https://osprey.bco-dmo.org/dataset-deployment/455521/data

Expand/Collapse All

Description

Niskin bottle data from CTD casts from the KN207-01 cruise. The raw bottle data was processed using Seasave software version 7.21e (QA/QC has not been performed).

Methods & Sampling

Dataset acquisition description

Header information from Sea-Bird SBE 9 Bottle (.btl) Data file:
Temperature SN = 4406; Conductivity SN = 1474
Number of Bytes Per Scan = 40; Number of Voltage Words = 5
Number of Scans Averaged by the Deck Unit = 1

Sensor Channel 1: Frequency 0, Temperature; Sensor ID = 55; Serial Number = 4406
Calibration Date: 14-Feb-12
UseG_J: 1
A: 0.00000000e+000; B: 0.00000000e+000; C: 0.00000000e+000; D: 0.00000000e+000; F0_Old: 0.000
G: 4.33630903e-003
H: 6.36463726e-004
I: 2.06290680e-005
J: 1.71729728e-006
F0: 1000.000
Slope: 1.00000000; Offset: 0.0000

Sensor Channel 2: Frequency 1, Conductivity; Sensor ID = 3; Serial Number = 1474
Calibration Date: 14-Feb-12
UseG_J: 1; Cell const and series R are applicable only for wide range sensors.
SeriesR: 0.0000; CellConst: 2000.0000; ConductivityType: 0
Coefficients equation = 0
A: 0.00000000e+000; B: 0.00000000e+000; C: 0.00000000e+000; D: 0.00000000e+000 M: 0.0
CPcor: -9.57000000e-008
Coefficients equation = 1
   G: -4.21351634e+000
   H: 5.39243337e-001
   I: -2.08827162e-004
   J: 3.95099976e-005
   CPcor: -9.57000000e-008; CTcor: 3.2500e-006
   WBOTC not applicable unless ConductivityType = 1.
WBOTC: 0.00000000e+000
Slope: 1.00000000; Offset: 0.00000

Sensor Channel 3: Frequency 2, Pressure, Digiquartz with TC; Sensor ID = 45; Serial Number = 69685 in 090484 vertical orientation
Calibration Date: 12/18/2002
C1: -4.680530e+004; C2: -8.320595e-001; C3: 1.450810e-002
D1: 3.903100e-002; D2: 0.000000e+000
T1: 3.038361e+001; T2: -5.411459e-004; T3: 4.085080e-006; T4: 2.564540e-009
Slope: 0.99995000; Offset: 0.00000
T5: 0.000000e+000
AD590M: 1.280820e-002; AD590B: -9.210198e+000

Sensor Channel 4: Frequency 3, Temperature, 2; Sensor ID = 55; Serial Number = 2271
Calibration Date: 14-Feb-12
UseG_J: 1
A: 0.00000000e+000; B: 0.00000000e+000; C: 0.00000000e+000; D: 0.00000000e+000; F0_Old: 0.000
G: 4.33365550e-003
H: 6.41046238e-004
I: 2.31654312e-005
J: 2.15092946e-006
F0: 1000.000
Slope: 1.00000000; Offset: 0.0000

Sensor Channel 5: Frequency 4, Conductivity, 2; Sensor ID = 3; Serial Number = 2707
Calibration Date: 14-Feb-12
UseG_J: 1; Cell const and series R are applicable only for wide range sensors.
SeriesR: 0.0000
CellConst: 2000.0000
ConductivityType: 0
Coefficients equation = 0
   A: 0.00000000e+000; B: 0.00000000e+000; C: 0.00000000e+000; D: 0.00000000e+000; M: 0.0
   CPcor: -9.57000000e-008
Coefficients equation = 1
   G: -1.07258216e+001
   H: 1.55968861e+000
   I: -1.50749109e-003
   J: 2.09512327e-004
   CPcor: -9.57000000e-008; CTcor: 3.2500e-006
WBOTC not applicable unless ConductivityType = 1.
WBOTC: 0.00000000e+000
Slope: 1.00000000; Offset: 0.00000

Sensor Channel 6: A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL; Sensor ID = 20; Serial Number = FLNTURTD-1013
Calibration Date: april 18, 2008
ScaleFactor: 6.00000000e+000
Vblank: 0.0800

Sensor Channel 7: A/D voltage 1, User Polynomial; Sensor ID = 61; Serial Number = FLNTURTD-1013
Calibration Date: april 18, 2008
SensorName: turbidity
A0: 0.15800000
A1: 2.00000000
A2: 0.00000000
A3: 0.00000000

Sensor Channel 8: A/D voltage 2, PAR/Irradiance, Biospherical/Licor; Sensor ID = 42; Serial Number = 4550
Calibration Date: 13-Mar-2008
M: 1.00000000
B: 0.00000000
CalibrationConstant: 77519400000.00000000
Multiplier: 1.00000000
Offset: -0.01906000

Sensor Channel 9: A/D voltage 3, Transmissometer, Chelsea/Seatech/WET Lab CStar; Sensor ID = 59; Serial Number = CST-1117DR
Calibration Date: 05-Aug-2011
M: 21.0530
B: -0.1537
PathLength: 0.250

Sensor Channel 10: A/D voltage 4, Altimeter; Sensor ID = 0; Serial Number = 1133
Calibration Date:
ScaleFactor: 14.950
Offset: 0.200

Sensor Channel 11: A/D voltage 5, Oxygen, SBE 43; Sensor ID = 38; Serial Number = 0723
Calibration Date: 11-Feb-12
Use2007Equation: 1
CalibrationCoefficients equation = 0
   Coefficients for Owens-Millard equation:
   Boc: 0.0000; Soc: 0.0000e+000
   Offset: 0.0000
   Pcor: 0.00e+000; Tcor: 0.0000
   Tau: 0.0
CalibrationCoefficients equation = 1
   Coefficients for Sea-Bird equation - SBE calibration in 2007 and later.
   Soc: 5.5281e-001
   Offset: -0.5125
   A: -2.4781e-003
   B: 9.2148e-005
   C: -1.8426e-006
   D0: 2.5826e+000
   D1: 1.92634e-004
   D2: -4.64803e-002
   E: 3.6000e-002
   Tau20: 1.3300
   H1: -3.3000e-002
   H2: 5.0000e+003
   H3: 1.4500e+003

Sensor Channel 12: A/D voltage 6, Free
Sensor Channel 13: A/D voltage 7, Free
Sensor Channel 14: SPAR voltage, Unavailable

Sensor Channel 15: SPAR voltage, SPAR/Surface Irradiance; Sensor ID = 51; Serial Number = 6294
Calibration Date: 2008-03-13
ConversionFactor: 1826.90000000
RatioMultiplier: 1.00000000

datcnv_ox_hysteresis_correction = yes
datcnv_ox_tau_correction = yes
datcnv_bottle_scan_range_source = scans marked with bottle confirm bit, 0, 5
bottlesum_ox_tau_correction = yes

Data Processing Description

Dataset Processing Description

Raw data was processed using Seasave software version 7.21e. BCO-DMO retrieved the processed data from the ship's hard drive and made the following edits to the bottle (.btl) files:
- Changed parameter names to conform to BCO-DMO conventions;
- Converted latitude and longitude from degrees and decimal minutes to decimal degrees;
- Added cast, date, time_start, lat_start, lon_start from the CTD file headers;
- Separated day_gmt, month_gmt, year, and time_gmt into separate columns from the original Date and Time fields.
- Bottle file '20101052' (bottle data from cast 52),contained only invalid/undecipherable values. Possible instrument or processing failure, or data file corruption. BCO-DMO replaced these data with 'nd' to indicate 'no data'.

More information about this dataset deployment

Funding

Award Number	Funding Source
OCE-1031143	NSF Division of Ocean Sciences

Instruments

Niskin bottle

Supplied Description:

Instrument Type

Generic Name: Niskin bottle

Community Identifier: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0412/

Generic Description:

A Niskin bottle (a next generation water sampler based on the Nansen bottle) is a cylindrical, non-metallic water collection device with stoppers at both ends. The bottles can be attached individually on a hydrowire or deployed in 12, 24, or 36 bottle Rosette systems mounted on a frame and combined with a CTD. Niskin bottles are used to collect discrete water samples for a range of measurements including pigments, nutrients, plankton, etc.

Parameters

Supplied Name	Supplied description	Supplied Units	Standard Name
cast	CTD cast number.	dimensionless	cast
date_start	Date (GMT) at the start of the CTD cast in YYYYmmdd format.	dimensionless	date_begin
time_start	Time (GMT) at start of the CTD cast in HHMM format (seconds have been rounded to the nearest minute).	dimensionless	time_start
lat_start	Latitude in decimal degrees at start of CTD cast; negative = South.	decimal degrees	lat_start
lon_start	Longitude in decimal degrees at start of CTD cast; negative = West.	decimal degrees	lon_start
bottle	Niskin bottle number. Originally named 'Bottle Position'.	unitless	bottle
time_gmt	Time (GMT) the bottle was fired. In hours, minutes, and decimal minutes; 24-hour clock.	HHMM.mm	time_gmt
day_gmt	2-digit day of month (GMT) when the bottle was fired.	dd (01 to 31)	day_gmt
month_gmt	2-digit month (GMT) when the bottle was fired.	mm (01 to 12)	month_gmt
year	4-digit year (GMT) when the bottle was fired.	YYYY	year
press_avg	Average pressure. Column originally named 'PrDM'.	decibars	press
press_sd	Standard deviation of press_avg.	decibars	no_bcodmo_term
press_min	Minimum pressure.	decibars	press
press_max	Maximum pressure.	decibars	press
depth_avg	Average depth. Column originally named 'DepSM'.	meters	depth
depth_sd	Standard deviation of depth_avg.	meters	no_bcodmo_term
depth_min	Minimum depth.	meters	depth_min
depth_max	Maximum depth.	meters	depth_max
potemp	Potential temperature from primary sensor. Originally named 'Potemp090C'.	degrees C	potemp
potemp2	Potential temperature from secondary sensor. Originally named 'Potemp190C'.	degrees C	potemp2
sal	Salinity from the primary sensor. Originally named 'Sal00'.	PSU	sal
sal2	Salinity from the secondary sensor. Originally named 'Sal11'.	PSU	sal2
O2	Oxygen in milliliters per liter measured by the SBE 43. Originally named 'Sbeox0ML/L'.	mL/L	O2
O2_sat_pcnt	Percent oxygen saturation. Originally named 'Sbeox0PS'.	%	O2_sat_pcnt
sigma_0	Density, sigma-theta, in kilograms per cubic meter from primary sensor. Originally named 'Sigma_e00'.	kg/m^3	sigma_0
sigma_0_2	Density, sigma-theta, in kilograms per cubic meter from secondary sensor. Originally named 'Sigma-e11'.	kg/m^3	sigma_0
sigma_t	Sigma-t density from primary sensor. Originally named 'Sigma-t00'.	kg/m^3	sigma_t
sigma_t_2	Sigma-t density from secondary sensor. Originally named 'Sigma-t11'.	kg/m^3	sigma_t
temp_avg	Average temperature from primary sensor. Column originally named 'T090C'.	degrees C	temp
temp_sd	Standard deviation of temp_avg.	degrees C	no_bcodmo_term
temp_min	Minimum temperature from primary sensor.	degrees C	temp
temp_max	Maximum temperature from primary sensor.	degrees C	temp
temp2_avg	Average temperature from secondary sensor. Column originally named 'T190C'.	degrees C	temp2
temp2_sd	Standard deviation of temp2_avg.	degrees C	no_bcodmo_term
temp2_min	Minimum temperature from secondary sensor.	degrees C	temp2
temp2_max	Maximum temperature from secondary sensor.	degrees C	temp2
cond_avg	Average conductivity in Siemens per meter from primary sensor. Column originally named 'C0S/m'.	S/m	cond
cond_sd	Standard deviation of cond_avg.	S/m	no_bcodmo_term
cond_min	Minimum conductivity from primary sensor.	S/m	cond
cond_max	Maximum conductivity from primary sensor.	S/m	cond
cond2_avg	Average conductivity in Siemens per meter from secondary sensor. Column originally named 'C1S/m'.	S/m	cond2
cond2_sd	Standard deviation of cond2_avg.	S/m	no_bcodmo_term
cond2_min	Minimum conductivity from secondary sensor.	S/m	cond2
cond2_max	Maximum conductivity from secondary sensor.	S/m	cond2
O2_v_avg	Average raw oxygen reading from the SBE 43. Column originally named 'Sbeox0V'.	volts	O2_v
O2_v_sd	Standard deviation of O2_v_avg.	volts	no_bcodmo_term
O2_v_min	Minimum raw oxygen reading from the SBE 43.	volts	O2_v
O2_v_max	Maximum raw oxygen reading from the SBE 43.	O2_v_max	O2_v
trans_avg	Average beam transmission from Chelsea/Seatech/WET Labs CStar. Column originally named 'Xmiss'.	%	trans
trans_sd	Standard deviation of trans_avg.	%	no_bcodmo_term
trans_min	Minimum beam transmission from Chelsea/Seatech/WET Labs CStar.	%	trans
trans_max	Maximum beam transmission from Chelsea/Seatech/WET Labs CStar.	%	trans
beam_c_avg	Average beam attenuation from Chelsea/Seatech/WET Labs CStar (in inverse meters). Column originally named 'Bat'.	1/m	beam_c
beam_c_sd	Standard deviation of beam_c_avg.	1/m	no_bcodmo_term
beam_c_min	Minimum beam attenuation from Chelsea/Seatech/WET Labs CStar (in inverse meters).	1/m	beam_c
beam_c_max	Maximum beam attenuation from Chelsea/Seatech/WET Labs CStar (in inverse meters).	1/m	beam_c
fluor_avg	Average fluorescence from WET Labs ECO-AFL/FL in milligrams per cubic meter. Column originally named 'FlECO-AFL'.	mg/m^3	fluor
fluor_sd	Standard deviation of fluor_avg.	mg/m^3	no_bcodmo_term
fluor_min	Minimum fluorescence from WET Labs ECO-AFL/FL in milligrams per cubic meter.	mg/m^3	fluor
fluor_max	Maximum fluorescence from WET Labs ECO-AFL/FL in milligrams per cubic meter.	mg/m^3	fluor
turbidity_avg	Average turbidity. Column originally named 'Upoly0'.	NTU	turbidity
turbidity_sd	Standard deviation of turbidity_avg.	NTU	no_bcodmo_term
turbidity_min	Minimum turbidity.	NTU	turbidity
turbidity_max	Maximum turbidity.	NTU	turbidity
scan_avg	Average scan number.	unitless	scan
scan_sd	Standard deviation of scan_avg.	unitless	no_bcodmo_term
scan_min	Minimum scan number.	unitless	scan
scan_max	Maximum scan number.	unitless	scan

Database

Contribute Data

Dataset: bottle_KN207-01
Deployment: KN207-01

Dataset acquisition description

Dataset Processing Description

Database

Contribute Data

Dataset: bottle_KN207-01Deployment: KN207-01

Dataset acquisition description

Dataset Processing Description

Dataset: bottle_KN207-01
Deployment: KN207-01