Dataset: bottle
Deployment: EN524

Niskin bottle data from EN524 cruise.

Principal Investigator:

Joan M. Bernhard (Woods Hole Oceanographic Institution, WHOI)

BCO-DMO Data Manager:

Shannon Rauch (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Project:

Ocean Acidification, Hypoxia and Warming: Experimental Investigations into Compounded Effects of Global Change on Benthic Foraminifera (OA, Hypoxia and Warming)

Current State:

Final with updates expected

Version:

03 June 2013

Version Date:

2013-06-18

Data URL:

https://osprey.bco-dmo.org/dataset-deployment/455991/data

Expand/Collapse All

Description

Niskin bottle data from 4 CTD casts made during the May 2013 EN524 cruise aboard R/V Endeavor. CTD data were preliminarily processed by the ship's technician during the cruise for initital sensor check. No post-cruise processing or calibrations have been applied.

Methods & Sampling

Dataset acquisition description

Notes from the ship's technician:
No CTD "in water" tests were done during the cruise. Four CTD “on deck” tests were done during the cruise. Sampling casts were to ~72m, or shallower ~4m above bottom. The PAR and SPAR sensors were not installed at all during the cruise. Unless otherwise requested, only Primary Cond is advanced in deck unit. However, our Version 2 of SBE Model 11 plus deck unit can advance both. The Secondary Cond is advanced in processing. Max winch speed was 30 m/min. 12 place frame with 12 OTE external tension sample bottles were used.

CTD gets GPS from bridge switch. Whatever GPS they have selected is the unit that is used (most likely Northstar/Furuno WAAS or Furuno WAAS). 4800 baud.

The seas were calm for most of the cruise with rain and winds to ~25kts on 20 May 2013.

The CTD for all four casts had Pressure, dual Temperature and Conductivity sensors and Pumps, WET Labs C-Star 25cm Transmissometer, WET Labs ECO Fluorometer, Benthos Altimeter, SBE43 Oxygen 1, Oxygen 2 sensors and 12 OTE 10L Niskin bottles on the smaller (12pl) of GSO’s SBE frames. CTD was horizontally mounted.

Data Processing Description

Dataset Processing Description

Notes from the ship's technician:
Data have been preliminarily processed by the ship's technician during the cruise for intitial sensor check. No post-cruise processing or calibrations have been applied. Pressure and blocked transmissometer values from a deck test were used to create con files with updated pressure and transmissometer sensor coefficients. All casts were processed with updated con files (con file used named "EN524_0444d_NoPS.xmlcon").

Configuration Reports (PDF files):
CTD con report
CTD psa report

BCO-DMO Processing Notes:
Modified parameter names to conform with BCO-DMO naming conventions;
Removed several columns from data display: scan; voltages; lat_sd, lat_min, lat_max, lon_sd, lon_min, lon_max (differences between max and min values were all 0.00001 or less);
Added starting date, time, lat, and lon from the CTD file headers;
Added ISO_DateTime_UTC using the original date and time fields.

More information about this dataset deployment

Funding

Award Number	Funding Source
OCE-1219948	NSF Division of Ocean Sciences

Instruments

Niskin bottle

Supplied Description:

Instrument Type

Generic Name: Niskin bottle

Community Identifier: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0412/

Generic Description:

A Niskin bottle (a next generation water sampler based on the Nansen bottle) is a cylindrical, non-metallic water collection device with stoppers at both ends. The bottles can be attached individually on a hydrowire or deployed in 12, 24, or 36 bottle Rosette systems mounted on a frame and combined with a CTD. Niskin bottles are used to collect discrete water samples for a range of measurements including pigments, nutrients, plankton, etc.

Parameters

Supplied Name	Supplied description	Supplied Units	Standard Name
sci_event	Event number designation provided by science party.	integer	event
month	2-digit month at start of CTD cast.	mm (01 to 12)	month
day	2-digit day of month at start of CTD cast.	dd (01 to31)	day
year	4-digit year at start of CTD cast.	YYYY	year
time_start	Time (UTC) at start of CTD cast.	HHMM.mm	time_start
lat_start	Latitude at start of cast. Positive values = North.	decimal degrees	lat_start
lon_start	Longitude at start of cast. Negative values = West.	decimal degrees	lon_start
ISO_DateTime_UTC_start	Start date/time (UTC) formatted to ISO 8601 standard. T indicates start of time string; Z indicates UTC.	YYYY-mm-ddTHH:MM:SS.ssZ	ISO_DateTime_UTC
bottle	Niskin bottle position.	integer	bottle
time	Time (UTC).	HHMM.mm	time
press_avg	Average pressure. Column originally named 'PrDM'.	decibars	press
depth_avg	Average depth. Column originally named 'DepSM'.	meters	depth
lat_avg	Latitude. Positive values = North.	decimal degrees	lat
lon_avg	Longitude. Negative values = West.	decimal degrees	lon
potemp	Potential temperature (ITS-90) from primary sensor; originally named 'Potemp090C'.	degrees Celsius	potemp
potemp2	Potential temperature (ITS-90) from secondary sensor; originally named 'Potemp190C'.	degrees Celsius	potemp2
sound_vel	Sound velocity (Chen-Millero) from primary sensor; originally named 'SvCM'.	meters per second (m/s)	sound_vel
sound_vel2	Sound velocity (Chen-Millero) from secondary sensor; originally named 'SvCM1'.	meters per second (m/s)	sound_vel
sigma_0	Density (sigma-theta) from primary sensor; originally named 'Sigma-e00'.	kilograms per cubic meter (kg/m^3)	sigma_0
sigma_0_2	Density (sigma-theta) from secondary sensor; originally named 'Sigma-e11'.	kilograms per cubic meter (kg/m^3)	sigma_0
temp_avg	Average temperature (ITS-90) from primary sensor. Column originally named 'T090C'.	degrees Celsius	temp
temp2_avg	Average temperature (ITS-90) from secondary sensor. Column originally named 'T190C'.	degrees Celsius	temp2
temp_diff_avg	Average temperature difference; secondary - primary (temp2 - temp); originally named 'T2-T190C'.	degrees Celsius	no_bcodmo_term
cond_avg	Average conductivity from primary sensor. Column originally named 'C0S/m'.	siemens per meter (S/m)	cond
cond2_avg	Average conductivity from secondary sensor. Column originally named 'C1S/m'.	siemens per meter (S/m)	cond2
cond_diff_avg	Average conductivity difference; secondary - primary (cond2 - cond); originally named 'C2-C1S/m'.	siemens per meter (S/m)	no_bcodmo_term
sal	Salinity from primary sensor; originally named 'Sal00'.	PSU	sal
sal2	Salinity from secondary sensor; originally named 'Sal11'.	PSU	sal2
O2_sat	Oxygen saturation; originally named 'OxsatML/L'.	milliliters per Liter (mL/L)	O2sat
O2	Oxygen from from primary SBE 43 sensor; originally named 'Sbeox0ML/L'.	milliliters per liter (mL/L)	O2
O2_2	Oxygen from secondary SBE 43 sensor; originally named 'Sbeox1ML/L'.	milliliters per liter (mL/L)	O2
O2_v_avg	Average raw oxygen reading from the SBE 43. Column originally named 'Sbeox0V'.	volts	O2_v
O2_v2_avg	Average raw oxygen (volts) from secondary SBE 43 sensor; originally named 'Sbeox1V'.	volts	O2_v
beam_c_avg	Average beam attenuation from WET Labs C-Star (in inverse meters). Column originally named 'CStarAt0'.	reciprocal meters (1/m)	beam_c
trans_avg	Average beam transmission from WET Labs C-Star. Column originally named 'CStarTr0'.	%	trans
fluor_avg	Average fluorescence from WET Labs ECO-AFL/FL. Column originally named 'FlECO-AFL'.	milligrams per cubic meter (mg/m^3)	fluor
alt_avg	Average altitude of instrument above the bottom; originally named 'AltM'.	meters	altitude
time_elapsed_avg	Average time elapsed; originally named 'TimeS'.	seconds	time_elapsed
press_min	Minimum pressure.	decibars	press
press_max	Maximum pressure.	decibars	press
press_sd	Standard deviation of press_avg.	decibars	std_dev
depth_min	Minimum depth.	meters	depth_min
depth_max	Maximum depth.	meters	depth_max
depth_sd	Standard deviation of depth_avg.	meters	std_dev
temp_min	Minimum temperature (ITS-90) from primary sensor.	degrees Celsius	temp
temp_max	Maximum temperature (ITS-90) from primary sensor.	degrees Celsius	temp
temp_sd	Standard deviation of temp_avg.	degrees Celsius	std_dev
temp2_min	Minimum temperature (ITS-90) from secondary sensor.	degrees Celsius	temp2
temp2_max	Maximum temperature (ITS-90) from secondary sensor.	degrees Celsius	temp2
temp2_sd	Standard deviation of temp2_avg.	degrees Celsius	std_dev
temp_diff_min	Minimum temperature difference; secondary - primary (temp2 - temp).	degrees Celsius	no_bcodmo_term
temp_diff_max	Maximum temperature difference; secondary - primary (temp2 - temp).	degrees Celsius	no_bcodmo_term
temp_diff_sd	Standard deviation of temp_diff_avg.	degrees Celsius	std_dev
cond_min	Minimum conductivity from primary sensor.	siemens per meter (S/m)	cond
cond_max	Maximum conductivity from primary sensor.	siemens per meter (S/m)	cond
cond_sd	Standard deviation of cond_avg.	siemens per meter (S/m)	std_dev
cond2_min	Minimum conductivity from secondary sensor.	siemens per meter (S/m)	cond2
cond2_max	Maximum conductivity from secondary sensor.	siemens per meter (S/m)	cond2
cond2_sd	Standard deviation of cond2_avg.	siemens per meter (S/m)	std_dev
cond_diff_min	Minimum conductivity difference; secondary - primary (cond2 - cond).	siemens per meter (S/m)	no_bcodmo_term
cond_diff_max	Maximum conductivity difference; secondary - primary (cond2 - cond).	siemens per meter (S/m)	no_bcodmo_term
cond_diff_sd	Standard deviation of cond_diff_avg.	siemens per meter (S/m)	std_dev
O2_v_min	Minimum raw oxygen reading from the SBE 43.	volts	O2_v
O2_v_max	Maximum raw oxygen reading from the SBE 43.	volts	O2_v
O2_v_sd	Standard deviation of O2_v_avg.	volts	std_dev
O2_v2_min	Minimum raw oxygen (volts) from secondary SBE 43 sensor.	volts	O2_v
O2_v2_max	Maximum raw oxygen (volts) from secondary SBE 43 sensor.	volts	O2_v
O2_v2_sd	Standard deviation of O2_v2_avg.	volts	O2_v
beam_c_min	Minimum beam attenuation from WET Labs C-Star (in inverse meters).	reciprocal meters (1/m)	beam_c
beam_c_max	Maximum beam attenuation from WET Labs C-Star (in inverse meters).	reciprocal meters (1/m)	beam_c
beam_c_sd	Standard deviation of beam_c_avg.	reciprocal meters (1/m)	std_dev
trans_min	Minimum beam transmission from WET Labs C-Star.	%	trans
trans_max	Maximum beam transmission from WET Labs C-Star.	%	trans
trans_sd	Standard deviation of trans_avg.	%	std_dev
fluor_min	Minimum fluorescence from WET Labs ECO-AFL/FL.	milligrams per cubic meter (mg/m^3)	fluor
fluor_max	Maximum fluorescence from WET Labs ECO-AFL/FL.	milligrams per cubic meter (mg/m^3)	fluor
fluor_sd	Standard deviation of fluor_avg.	milligrams per cubic meter (mg/m^3)	std_dev
alt_min	Minimum altitude of instrument above the bottom.	meters	altitude
alt_max	Maximum altitude of instrument above the bottom.	meters	altitude
alt_sd	Standard deviation of alt_avg.	meters	std_dev
time_elapsed_min	Minimum time elapsed.	seconds	time_elapsed
time_elapsed_max	Maximum time elapsed.	seconds	time_elapsed
time_elapsed_sd	Standard deviation of time_elapsed_avg.	seconds	std_dev
ISO_DateTime_UTC	Date/time (UTC) formatted to ISO 8601 standard. T indicates start of time string; Z indicates UTC.	YYYY-mm-ddTHH:MM:SS.ssZ	ISO_DateTime_UTC

Database

Contribute Data

Dataset: bottle
Deployment: EN524

Dataset acquisition description

Dataset Processing Description

Database

Contribute Data

Dataset: bottleDeployment: EN524

Dataset acquisition description

Dataset Processing Description

Dataset: bottle
Deployment: EN524