Dataset: 3OEC-instrument PAR

Name: PAR recorded by two Odyssey PAR loggers in the Florida Keys from 11-17 July 2017
Published: 2021-04-23
Keywords: oceans

Cite This Dataset

DOI:10.26008/1912/bco-dmo.849979.1

Spatial Extent: N:24.7253 E:-80.83083 S:24.7253 W:-80.83083

Temporal Extent: 2017-07-11 - 2017-07-17

Project:

Collaborative Research: Robust optode-based eddy correlation systems for oxygen flux measurements in aquatic environments (Robust optode-based eddy correlation systems)

Principal Investigator:

Markus Huettel (Florida State University, FSU - EOAS)

Co-Principal Investigator:

Peter Berg (University of Virginia, UVA)

Contact:

Markus Huettel (Florida State University, FSU - EOAS)

BCO-DMO Data Manager:

Shannon Rauch (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Version:

Version Date:

2021-04-23

Restricted:

Validated:

Yes

Current State:

Final no updates expected

PAR recorded by two Odyssey PAR loggers in the Florida Keys from 11-17 July 2017

Abstract:

This dataset presents the PAR light data recorded by the two Odyssey PAR loggers. The loggers were deployed July 11-17, 2017 in a subtropical inner shelf environment (Salinity: 35-36, temperature: 28-31°C) approximately 9 km south of Long Key in the Florida Keys (24° 43.52'N, 80° 49.85'W). The site was located at 9 ± 1 m water depth near the center of a large flat carbonate platform covered with coral sand. The instruments were installed on the 3OEC instrument at ~185 cm above the sediment-water interface.

Expand/Collapse All

Archival Copy

Version Date	Archive	Persistent Identifier (PID)	Date PID Issued
2021-04-23	Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)	10.26008/1912/bco-dmo.849979.1	2021-04-23

Methods & Sampling

Two Odyssey PAR loggers were deployed July 11-17, 2017 in a subtropical inner shelf environment (Salinity: 35-36, temperature: 28-31°C) approximately 9 km south of Long Key in the Florida Keys (24° 43.52'N, 80° 49.85'W). The site was located at 9 ± 1 m water depth near the center of a large flat carbonate platform covered with coral sand. The instruments were installed on the 3OEC instrument at ~185 cm above the sediment-water interface.

The temperature and oxygen data are the data recorded by factory-calibrated loggers:
Sampling rate: 1 / 10 min
Wavelength range: 400 to 700 nm

The method of data analysis is reported in Huettel et al. (2020).

Data Processing Description

BCO-DMO Processing:
- renamed fields to comply with BCO-DMO naming conventions;
- added ISO8601 date/time field in UTC.

Data Files

File
3OEC_PAR.csv (Comma Separated Values (.csv), 62.01 KB) MD5:fdb764e27cf81b516b30cda9b5f50b3e Primary data file for dataset ID 849979

More Information about this dataset

Funding Sources

Funding Source	Award Number
NSF Division of Ocean Sciences	OCE-1334117
NSF Division of Ocean Sciences	OCE-1334848

Deployments

Deployment	Synonyms	Start Date	Platform	Investigator
Diodon_2017-07-11-12	3OEC Deployment 1	2017-07-11	R/V Diodon	Markus Huettel (Chief Scientist)	data info
Diodon_2017-07-13-14	3OEC Deployment 2	2017-07-13	R/V Diodon	Markus Huettel (Chief Scientist)	data info
Diodon_2017-07-15-16	3OEC Deployment 3	2017-07-15	R/V Diodon	Markus Huettel (Chief Scientist)	data info
Diodon_2017-07-16-17	3OEC Deployment 4	2017-07-16	R/V Diodon	Markus Huettel (Chief Scientist)	data info

Instruments

Photosynthetically Available Radiation Sensor

Supplied Name: Odyssey PAR logger

Supplied Description:

Odyssey PAR logger; Serial numbers 1024, 1025; Calibrations: factory calibrated.

Instrument Type

Generic Name: Photosynthetically Available Radiation Sensor

Acronym: PAR sensor

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/122/

Generic Description:

A PAR sensor measures photosynthetically available (or active) radiation. The sensor measures photon flux density (photons per second per square meter) within the visible wavelength range (typically 400 to 700 nanometers). PAR gives an indication of the total energy available to plants for photosynthesis. This instrument name is used when specific type, make and model are not known.

Parameters

Date and time formats are described in python strftime() syntax.

Supplied Name	Supplied description	Supplied Units	Standard Name
ISO_DateTime_EST	Date and time, Eastern Standard Time Zone; format follows ISO8601 standard: YYYY-MM-DDThh:mm:ss Format: %Y-%m-%dT%H:%M:%S	unitless	ISO_DateTime_Local
PAR_1	PAR	micromoles photons per square meter per second (umol photons m-2 s-1)	PAR
PAR_2	PAR	micromoles photons per square meter per second (umol photons m-2 s-1)	PAR
ISO_DateTime_UTC	Date and time, UTC; format follows ISO8601 standard: YYYY-MM-DDThh:mm:ssZ Format: %Y-%m-%dT%H:%M:%SZ	unitless	ISO_DateTime_UTC

Status message

Database

Contribute Data

Dataset: 3OEC-instrument PAR