Dataset: 3OEC-instrument PAR
Deployment: Diodon_2017-07-13-14

3OEC-instrument PAR

View Data: For data, See Dataset Metadata Page: https://osprey.bco-dmo.org/dataset/849979

Principal Investigator:

Markus Huettel (Florida State University, FSU - EOAS)

Co-Principal Investigator:

Peter Berg (University of Virginia, UVA)

Contact:

Markus Huettel (Florida State University, FSU - EOAS)

BCO-DMO Data Manager:

Shannon Rauch (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Project:

Collaborative Research: Robust optode-based eddy correlation systems for oxygen flux measurements in aquatic environments (Robust optode-based eddy correlation systems)

Version:

Deployment Synonyms:

3OEC Deployment 2

Expand/Collapse All

Description

Methods & Sampling

Dataset acquisition description

Two Odyssey PAR loggers were deployed July 11-17, 2017 in a subtropical inner shelf environment (Salinity: 35-36, temperature: 28-31°C) approximately 9 km south of Long Key in the Florida Keys (24° 43.52'N, 80° 49.85'W). The site was located at 9 ± 1 m water depth near the center of a large flat carbonate platform covered with coral sand. The instruments were installed on the 3OEC instrument at ~185 cm above the sediment-water interface.

The temperature and oxygen data are the data recorded by factory-calibrated loggers:
Sampling rate: 1 / 10 min
Wavelength range: 400 to 700 nm

The method of data analysis is reported in Huettel et al. (2020).

Data Processing Description

Dataset Processing Description

BCO-DMO Processing:
- renamed fields to comply with BCO-DMO naming conventions;
- added ISO8601 date/time field in UTC.

More information about this dataset deployment

Funding

Award Number	Funding Source
OCE-1334117	NSF Division of Ocean Sciences
OCE-1334848	NSF Division of Ocean Sciences

Instruments

Photosynthetically Available Radiation Sensor

Supplied Name: Odyssey PAR logger

Supplied Description:

Odyssey PAR logger; Serial numbers 1024, 1025; Calibrations: factory calibrated.

Instrument Type

Generic Name: Photosynthetically Available Radiation Sensor

Acronym: PAR sensor

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/122/

Generic Description:

A PAR sensor measures photosynthetically available (or active) radiation. The sensor measures photon flux density (photons per second per square meter) within the visible wavelength range (typically 400 to 700 nanometers). PAR gives an indication of the total energy available to plants for photosynthesis. This instrument name is used when specific type, make and model are not known.

Parameters

Supplied Name	Supplied description	Supplied Units	Standard Name
ISO_DateTime_EST	Date and time, Eastern Standard Time Zone; format follows ISO8601 standard: YYYY-MM-DDThh:mm:ss	unitless	ISO_DateTime_Local
PAR_1	PAR	micromoles photons per square meter per second (umol photons m-2 s-1)	PAR
PAR_2	PAR	micromoles photons per square meter per second (umol photons m-2 s-1)	PAR
ISO_DateTime_UTC	Date and time, UTC; format follows ISO8601 standard: YYYY-MM-DDThh:mm:ssZ	unitless	ISO_DateTime_UTC

Database

Contribute Data

Dataset: 3OEC-instrument PAR
Deployment: Diodon_2017-07-13-14

Dataset acquisition description

Dataset Processing Description

Database

Contribute Data

Dataset: 3OEC-instrument PARDeployment: Diodon_2017-07-13-14

Dataset acquisition description

Dataset Processing Description

Dataset: 3OEC-instrument PAR
Deployment: Diodon_2017-07-13-14